HP OMEN - 17-w200 CTO User Manual download pdf (Page 55)

Memory module

Description Spare part number

Memory

2 GB SODIMM 2400 MHz 1.2 v DDR4 shared 864271-850

4 GB SODIMM 2400 MHz 1.2 v DDR4 shared 862397-850

8 GB SODIMM 2400 MHz 1.2 v DDR4 shared 862398-850

Update BIOS before adding memory modules

Before adding new memory, make sure you update the computer to the latest BIOS.

CAUTION: Failure to update the computer to the latest BIOS prior to installing new memory may result in

various system problems.

To update BIOS:

1. Navigate to http:\\www.hp.com.

2. Select Support , and then select Software & drivers.

3. In the Enter my HP model number box, type the computer model information, and then select Find my

product.

-or-

Select Identify now.

4. Select the link for the computer model.

5. Select the language and the operating system.

6. Under the downloads heading, select the BIOS link.

7. Select the link for the most recent BIOS.

8. Select the Download button, and then follow the on-screen instructions.

Before removing a memory module, follow these steps:

1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then

unplugging the AC adapter from the computer.

3. Disconnect all external devices from the computer.

4. Remove the following components:

a. Battery (see Battery on page 34)

b. Optical drive (see Optical drive on page 35)

c. Base enclosure (see Base enclosure on page 37)

Remove the memory module:

1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.

(The memory module tilts up.)

Component replacement procedures 43

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 103 104

No comments

HP OMEN - 17-w200 CTO User Manual Page 55