HP EliteBook 8530p Specifications download pdf (Page 101)

RJ-11 connector cable

NOTE: The RJ-11 connector cable is included in the Cables Kit, spare part number 452198-001.

Before removing the RJ-11 connector cable, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 45).

5. Remove the following components:

a. Hard drive (see

Hard drive on page 51)

b. Optical drive (see

Optical drive on page 47)

c. Keyboard (see

Keyboard on page 61)

d. Switch cover (see

Switch cover on page 66)

e. Display assembly (see

Display assembly on page 69)

f. Top cover (see

Top cover on page 76)

g. Fan (see

Fan on page 81)

h. Heat sink (see

Heat sink on page 83)

i. Modem module (see

Modem module on page 64)

j. System board (see

System board on page 90)

Remove the RJ-11 connector cable:

1. Position the computer right-side up, with the front toward you.

2. Remove the RJ-11 connector (1) from the clip built into the base enclosure.

Component replacement procedures 93

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 170 171

No comments

HP EliteBook 8530p Specifications Page 101