HP 3C339 User Manual download pdf (Page 17)

3 Connecting to a Windows NT Server 3.51

Windows NT Workstation 4.0

Windows NT

Workstation 4.0

Requirements

• HP Vectra VE7/VE8 with Microsoft Windows NT Workstation 4.0 in-

stalled.

• 3COM 3C339 card and drivers disk

• Microsoft Windows NT Workstation 4.0 and Service Pack Media.

• Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/

IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

Device Configuration

• I/O Base Address DC00

• Interrupt Request Level 10

• Boot PROM Disabled

• Transceiver Type Auto Select

• Network Driver Optimization Windows or OS/2 Client

• Maximum Modem Speed 9600 Bps

• Plug and Play Compatibility Disabled

• Full Duplex Disabled

Procedure

1 With the HP Vectra VE7/VE8 turned off, install the 3COM Token Ring

3C339 adapter card into an PCI slot.

2 Connect network cable media to the 3COM 3C339 card.

3 Insert a DOS bootable diskette and power on the machine.

4 After booting, insert the 3COM Software “3C339 drivers disk.” and

execute “A:\3C3X9CFG.EXE.”

5 Select “CONFIGURE NIC” and verify the resource settings listed above

under the heading “Device Configuration.”

6 If changes are required, save those changes and exit.

7 Remove the 3COM software driver diskette and reboot the machine.

8 After Windows loads, open the “Main” program group, double-click on

“Control Panel” icon.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

No comments

HP 3C339 User Manual Page 17