HP Photosmart 1200 Photo Scanner User's Guide download pdf (Page 15)

hp photo scanner 1200

chapter 2

set up as battery-powered

You will need four AA batteries and one memory card. For information on

memory cards and batteries, see batteries, memory cards, and accessories on

page 37.

insert the batteries

1 Open the battery door on the underside of

the scanner.

2 Insert the four AA batteries as indicated on

the scanner.

3 Close the battery door.

insert the memory card

Insert the memory card, label side up, until it

snaps into place. You can use either an SD card

(bottom slot) or a CF card (top slot).

If both cards are inserted, the scanner will write

to only the CF card.

turn on scanner power

Open the lid and press the Power button.

The scanner is ready when the indicator light

turns on and front panel display is on. SD or CF

will appear in the front panel display to

indicate the type of memory card inserted.

Note that the memory card must be inserted

before turning on the scanner.

scan a photo

1 Place the photo face down on the

scanner glass and close the lid.

2 Press the Scan button on the front of

the scanner. The indicator light will blink

until the scan is complete. When the

light stops blinking, the Photos

Remaining indicator will decrease by

one, and the image is stored on the

memory card.

Caution! Do not remove the memory card until the light stops

blinking. Doing so may cause loss of scanned images.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

No comments

HP Photosmart 1200 Photo Scanner User's Guide Page 15