HP Modular Cooling System User Manual download pdf (Page 49)

Removal and replacement procedures 49

Press and hold the C key to reset the management module.

5. Reconnect the power cables ("Reconnecting the power" on page 73).

6. Verify the user-defined settings through the web interface.

7. Complete the operation checklist (on page 73).

Operator display

The operator display is located on the front door of the MCS G2 unit.

The following tools are required for installation:

• 7-mm socket or wrench

• Wire cutters

Removing the operator display

1. Disconnect the power ("Disconnecting the power" on page 23).

2. Open the front door of the MCS G2 unit.

3. Using wire cutters, clip the cable ties that bind all the cables on the front of the MCS G2 unit.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 82 83

No comments

HP Modular Cooling System User Manual Page 49