Hp Media Center PC User Manual Page 65

  • Download
  • Add to my manuals
  • Print
  • Page
    / 86
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 64
Configuring Speaker and Sound Options 61
Using a 5.1 to 7.1 speaker system with headphones
For select models that include a 5.1 or higher
speaker system, a headphones connector is located
on the right side of the control tower.
If the control tower displays HP (for headphones),
the headphones are enabled; the sound to the
speakers and the subwoofer is muted.
Push and hold the On button on the control
tower for several seconds to enable sound
from the speakers.
Press the On button briefly to enable the
headphones.
Selecting recording devices
(Type 6 connectors only)
To select a sound recording device:
1 Click Start on the taskbar.
2 Choose Control Panel.
3 Click Sounds and Audio Devices (or
Sounds, Speech and Audio Devices).
The Sounds and Audio Devices
window opens.
4 Click the Audio tab. The window opens.
5 In Sound Recording, select a recording
device; for example, Realtek HD Front
Pink Jack.
6 Click OK.
7 Close the window.
Resolving Sound Issues
If you don’t have sound from your speakers, check
the following:
Check volume and mute settings. See “Using
Headphones” on page 60.
Use active, powered speakers, or speakers
with an amplifier.
Verify sound cable connections.
Make sure the software program and sound
software are configured.
Some programs may result in low volume,
even when the Volume knob is turned to the
maximum position. If this is the case,
double-click the Volume icon on the taskbar,
and increase the volume.
Reconfigure the sound software for
surround sound.
Reinstall the sound card drivers by using
HP Application Recovery. See “Application
Recovery” in the PC Troubleshooting and
Maintenance Guide.
Page view 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 85 86

Comments to this Manuals

No comments