Hp Netserver E Server series User Manual download pdf (Page 37)

Chapter 4 Installing Additional Memory

9. Spread the two retaining latches on the slot outward. See Figure 4-3.

10. Align the notches on the DIMM with the keys on the slot.

See Figure 4-3.

Retaining Latches

DIMM Slot

Keys

Notches

Figure 4-3. DIMM to Slot Alignment

11. Holding the DIMM at 90 degrees to the system board, press the DIMM

fully into the slot until the retaining latches close. See Figure 4-4.

If the latches do not close, the DIMM is not inserted correctly.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 105 106

No comments

Hp Netserver E Server series User Manual Page 37