Hp Netserver E Server series User Manual download pdf (Page 18)

Chapter 2 Opening and Closing the HP NetServer

4. Push the cover forward using the slotted handles until it is seated in place.

5. Replace the six (6) T-15/slotted thumbscrews in the rear. See Figure 2-1.

6. Re-lock the cover with the key lock at the rear of the NetServer.

Adjusting the NetServer Feet

The stabilizing feet are used to steady the HP NetServer during normal operation

and must be turned outward during normal use. When adding internal accessories

or servicing the NetServer, turn the feet inward before laying the NetServer on its

side on the floor or a table. You must reverse the process when placing the

NetServer upright before returning it to normal operation.

Figure 2-4. Turning Feet Inward

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 105 106

No comments

Hp Netserver E Server series User Manual Page 18