2-12
Installing and Connecting the ProCurve 620 Redundant and External Power Supply
Recommended Connection Topologies
Installing and Connecting the ProCurve
620 Redundant and External Power
EPS Connections on the 620 RPS/EPS
Recommendations
The 620 RPS/EPS is designed to provide primary or backup power to up to
two ProCurve PoE switches. In the following illustration, two ProCurve
Switch 3500yl-24G-PWR units are being supplied with external PoE power
from an 620 RPS/EPS. The switches provide PoE power to Ethernet devices
connected to their ports.
Figure 2-6. Connecting EPS to 2, 24 port switches
Limitations
In the illustration above, the maximum power that can be provided to each
switch is 398 watts.
UPS Support
The 620 RPS/EPS may be used in configurations where an Uninterruptible
Power Supply (UPS) is desired. See Appendix A, “Specifications,” for the
power requirements of the 620 RPS/EPS for use in determining your UPS
requirements.
620 RPS/EPS
ProCurve 3500yl-24G-PWR Switches
EPS
cables
Comments to this Manuals