HP M730 User Manual download pdf (Page 14)

Optical zoom

Optical zoom moves the lens between wide angle (1x) and telephoto (3x).

While in

Picture Capture or Video Record, use the

buttons on the Zoom lever to control zoom. Press

to zoom in

and

to zoom out.

NOTE: You can set the optical zoom to the position you want

just before recording video clips. However, you cannot use

optical zoom while the video clip is recording.

Digital zoom

In digital zoom, the Image Display shows a yellow frame around the scene and the image

quality setting (MP value). As you zoom in, the scene expands to show what the camera

will capture, and the MP value decreases to indicate the resolution at which the scene

will be captured.

When capturing images using digital zoom, make sure that the MP value on the Image

Display is appropriate for the size at which you want to print the captured image. For MP

values and their recommended print sizes, see Image Quality under “

Using the Picture

Capture and Video Record menus” on page 14.

To use digital zoom:

1. While in

Picture Capture, press on the Zoom lever to optically zoom to the

maximum level, then release the lever.

2. Press and hold

until the image you want to capture fills the yellow frame. If you

zoom in too far, press

3. To return to optical zoom, press

NOTE: Digital zoom is not available in / Panorama mode nor when recording

video clips.

Chapter 2

12 Taking pictures and recording video clips

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 49 50

No comments

HP M730 User Manual Page 14