HP RP3 User Manual download pdf (Page 25)

LED and Beeper Indications

The scanner’s beeper sounds and its LED illuminates to indicate various functions or errors on the

scanner. An optional “Green Spot” also performs useful functions. The following tables list these

indications. One exception to the behaviors listed in the tables is that the scanner’s functions are

programmable, and so may or may not be turned on. For example, certain indications such as the

power-up beep can be disabled using programming bar code labels.

Indicator Description LED Beeper

Power-up Beep The scanner is in the

process of powering-up.

N/A Scanner beeps four times at

highest frequency and

volume upon power-up.

Good Read Beep A label has been

successfully scanned by the

scanner.

LED behavior for this

indication is configurable via

the feature “Good Read:

When to Indicate” (see the

PRG for information).

The scanner will beep once

at current frequency, volume,

mono/bitonal setting and

duration upon a successful

label scan.

ROM Failure There is an error in the

scanner's software/

programming.

Flashes Scanner sounds one error

beep at highest volume.

Limited Scanning Label

Read

Indicates that a host

connection is not

established.

N/A Scanner 'chirps' six times at

the highest frequency and

current volume.

Scanner Active Mode The scanner is active and

ready to scan.

The Illumination LED is lit

steadily

N/A

Scanner Disabled The scanner has been

disabled by the host.

The LED blinks continuously N/A

Green Spot

flashes

momentarily

Upon successful read of a

label, the software shall turn

the green spot on for the

time specified by the

configured value.

N/A N/A

Image Capture Capturing an Image Upon image capture light

blinks once and will blink

multiple during larger image

transfers

N/A

Except when in sleep mode or when a Good Read LED Duration other than 00 is selected

Programming Mode - The following indications ONLY occur when the scanner is in Programming

Mode.

INDICATION DESCRIPTION LED BEEPER

Label Programming Mode

Entry

A valid programming label

has been scanned.

LED blinks continuously Scanner sounds four low

frequency beeps.

Label Programming Mode

Rejection of Label

A label has been rejected. N/A Scanner sounds three times

at lowest frequency and

current volume.

Scanner Configurator Mode Scanner is in support mode

ready for configuration

change.

The Indicator LED is lit

steady

N/A

LED and Beeper Indications 19

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

HP RP3 User Manual Page 25

Comments to this Manuals

Related products and manuals for Bar code readers HP RP3