HP E1429A User Manual download pdf (Page 317)

100

101

Appendix A

Specifications

Appendix Contents

This appendix contains the HP E1429A/B 20 MSa/s 2-Channel Digitizer

operating specifications. Except as noted, the specifications apply under the

following conditions:

• Period: 1 year

• Temperature: 0° - 55° C

• Relative humidity: ≤ 65% @ 0° - 40° C

• Warm up time: 1 hour

References to the Local Bus Interface apply ONLY to E1429B; otherwise,

E1429A and E1429B are identical except as noted. Characteristics given as

"typical”, “nominal” , or "supplemental" are non-warranted; they provide

additional information for application assistance.

NOTE (4.1.2.1) and similar notation refer to sections of "IEEE Standard 1057:

Trial-Use Standard for Digitizing Waveform Recorders", published

July 21, 1989. This document prescribes standard measurement procedures

for several performance characteristics.

NOTE "Full-scale" refers to the entire two-sided range (+ and -) of the A/D, NOT

to the one-sided interpretation customarily used by HP. The usage here

conforms to that defined by IEEE 1057.

Memory

Characteristics

Architecture Equal amounts of memory are dedicated to channel 1 and channel 2.

During measurements, both channels sample simultaneously and send data

to their respective portions of memory. Memory is not dual-ported, and

may not be read while it is being filled. However, data being routed to the

memory may simultaneously be routed to the Local Bus or the VME Bus,

according to their respective speed capabilities.

Appendix A Specifications 317

1 2 ... 312 313 314 315 316 317 318 319 320 321 322 ... 419 420

Comments to this Manuals

No comments

HP E1429A User Manual Page 317

Comments to this Manuals

Related products and manuals for Water pumps HP E1429A