HP E1429A User Manual download pdf (Page 231)

100

101

Readings may not be obtained from memory until the trigger system has returned to

the idle state. The FETCh? and READ? commands may be invoked before the

trigger system is in the idle state. These commands will wait until the trigger

system is idle before returning readings. The trigger idle state may be determined

externally from the high-to-low transition of the BUSY bit (bit 8) of the

STATus:OPERation:CONDition register.

Comments • Executable when initiated: No

• Coupled Command: No

• Both measurement channels are affected by this command.

• If the trigger system is not in the idle state, error -123,"Init ignored" will be

generated, and the trigger system will be unaffected.

• The ABORt command may be used to prematurely halt the trigger system and

place the HP E1429A in the idle state.

• Related Commands: *OPC, *OPC?, *RST, *WAI, ABORt, ARM subsystem,

STATus:OPC:INITiate, TRIGger subsystem

• *RST Condition: The trigger system is in the idle state.

Example Placing the HP E1429A in the wait-for-arm state

INIT Initiate signal measurement

INITiate[:IMMediate]

INITiate Subsystem Command Reference 231

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 419 420

Comments to this Manuals

No comments

HP E1429A User Manual Page 231

Comments to this Manuals

Related products and manuals for Water pumps HP E1429A