HP ProDesk 400 G4 Desktop Mini PC User Manual download pdf (Page 26)

Installing a hard drive

NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you

can transfer the data to the new hard drive.

1. If you are replacing a hard drive, transfer the silver and blue isolation mounting guide screws from the

old hard drive to the new hard drive.

2. Align the hard drive guide screws with the slots on the hard drive cage, press the hard drive down into

the cage, and then slide it forward until it stops and locks into place (1).

3. Rotate the hard drive latch down (2) to engage the hard drive.

4. Install the access panel.

● For instructions on installing the access panel on a 35W model, see Installing the access panel of

the HP EliteDesk 800 35W on page 13.

● For instructions on installing the access panel on any other model, see Installing the access panel

on page 11.

20 Chapter 3 Hardware upgrades

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 46 47

No comments

HP ProDesk 400 G4 Desktop Mini PC User Manual Page 26