HP f2304 23-inch High Def LCD Monitor User Manual download pdf (Page 15)

Setting Up the Monitor

User’s Guide 3–5

WARNING: Burn-in image damage may occur on monitors that

display the same static image on screen for a prolonged period of

time. To avoid burn-in image damage on your monitor screen, you

should always activate a screen saver application or turn off the

monitor when it is not in use for a prolonged period of time.

Selecting the Signal Connectors

and Cable

There are five signal input connectors: one VGA connector,

one DVI-I connector, one S-video connector, two RCA audio

connectors, and a PC Audio In connector. The monitor will

automatically determine at power-on which inputs have valid

video signals. The inputs can be selected via the On-Screen

Display (OSD) feature or by pressing the Input button on the

monitor’s front bezel.

The video mode supported by the DVI-I connector is

determined by the video cable used. For digital operation,

use the DVI-D to DVI-D signal cable provided.

Removing the Monitor Base

You can remove the monitor base to mount the monitor on a

wall, swing arm, or other mounting fixture. Read the caution

and warning statements below before beginning the

procedure.

CAUTION: Before beginning to disassemble the monitor, be sure

the monitor is turned off and the power and all signal cables are

disconnected.

WARNING: Before removing the base from the monitor, lay the

monitor flat with the front bezel down. Attempting to remove the

base from an upright monitor may result in injury to the user.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

No comments

HP f2304 23-inch High Def LCD Monitor User Manual Page 15