HP DreamColor Z27x Studio Display User Manual download pdf (Page 16)

Connecting the Cables

1. Place the monitor in a convenient, well-ventilated location near the computer.

2. Before connecting the cables, route the cables through the cable routing hole in the center of the

stand.

3. Depending on your configuration, connect either the DisplayPort or HDMI video cable between

the PC and the monitor.

NOTE: The video mode is determined by the video cable used. The monitor will automatically

determine which inputs have valid video signals. The inputs can be selected through the On-

Screen Display (OSD) feature by pressing one of the five front bezel buttons to activate the

buttons, and then press the bottom Open Menu button to open the OSD. In the OSD select

Video Input and choose the desired input source.

●

For DisplayPort digital operation, connect the DisplayPort signal cable to the DisplayPort

connector on the rear of the monitor and the other end to the DisplayPort connector on the

computer (cable provided).

NOTE: There are two DisplayPort connectors on the rear of the monitor allowing you to

connect two workstations to the monitor.

8 Chapter 3 Setting Up the Monitor

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 70 71

No comments

HP DreamColor Z27x Studio Display User Manual Page 16