HP LA2006x User Manual download pdf (Page 45)

Entering User Modes

The video controller signal may occasionally call for a mode that is not preset if:

●

You are not using a standard graphics adapter.

●

You are not using a preset mode.

It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen

display. Your changes can be made to any or all of these modes and saved in memory. The monitor

automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In

addition to the factory preset modes, there are at least 10 user modes that can be entered and

stored.

Energy Saver Feature

The monitors support a reduced power state. The reduced power state will be entered into if the

monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon

detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and

the power light is turned amber. When the monitor is in the reduced power state, the monitor will

utilize .5 watts of power. There is a brief warm up period before the monitor will return to its normal

operating mode.

Refer to the computer manual for instructions on setting energy saver features (sometimes called

power management features).

NOTE: The above power saver feature only works when connected to computers that have energy

saver features.

By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to

enter into the reduced power state at a predetermined time. When the monitor's Energy Saver utility

causes the monitor to enter the reduced power state, the power light blinks amber.

ENWW Entering User Modes 37

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 51 52

No comments

HP LA2006x User Manual Page 45