HP G2 Service Manual download pdf (Page 22)

2. Detach the power/volume button board (2) from the display panel assembly. (The power/volume

button board is attached to the display panel assembly with double-sided adhesive.)

3. Remove the power/volume button board and cable.

Reverse this procedure to install the power/volume button board.

Front-facing webcam

Description Spare part number

0.3-MP, front-facing, webcam (includes cable) 785181-001

Before removing the front-facing webcam, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,

and then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the back cover (see Back cover on page 12).

5. Disconnect the battery cable from the system board (see Battery on page 14).

Remove the front-facing webcam:

1. Release the ZIF connector (1) to which the front-facing webcam cable is attached, and then

disconnect the front-facing webcam cable from the system board.

16 Chapter 5 Removal and replacement procedures

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 34 35

No comments

HP G2 Service Manual Page 22