Hp 8.20q Fibre Channel Switch User Manual Page 92

  • Download
  • Add to my manuals
  • Print
  • Page
    / 150
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 91
92 Managing Logical Disks
To allow access to individual HBAs, select each HBA in the Servers and HBAs/Initiators available to
allow access to the selected Logical Disk list, and then click Add.
To allow access to all of the HBAs and servers shown in the Servers and HBAs/Initiators available
to allow access to the selected Logical Disk list, click Add All.
The HBAs and servers selected to grant access are listed under Servers and HBAs/Initiators allowed to
have access to the selected Logical Disk.
4. To deny access, do one of the following:
To disallow access to all HBAs within a server, select the server in the Servers and HBAs/Initiators
allowed to have access to the selected Logical Disk list, and then click Remove.
To disallow access to individual HBAs, select each HBA in the Servers and HBAs/Initiators allowed
to have access to the selected Logical Disk list, and then click Remove.
To disallow access to all of the HBAs and servers shown in the Servers and HBAs/Initiators allowed
to have access to the selected Logical Disk list, click Remove All.
NOTE: If any server is designated as an Unknown Server, you may be unable to deny access to
that HBA or server (that is, you cannot remove it from theallowed” list). For more information, see
“Troubleshooting, page 133; the Unknown Server problem is described on page 137.
The updated list of HBAs and servers allowed to have access to the LUN is listed under Servers and
HBAs/Initiators allowed to have access to the selected Logical Disk.
5. (Optional) To manually give an HBA access to the logical drive:
a. On the Logical Disk Server Presentation dialog box, click Manual Add. The New HBA Port Names
dialog box opens; see Figure 53 on page 82 (for EVA storage) or Figure 61 on page 89 (for MSA
storage).
b. In the first box, enter the world wide port name (WWPN) of the HBA. You can enter the HBA
WWPN formatted as either 20 consecutive alphanumeric characters, or as 10 two-digit segments
separated by hyphens; for example, xx-xx-xx-xx-xx-xx-xx-xx-xx-xx.
c. In the second box, enter the name of the server on which the HBA(s) are installed. If you do not
know the name of the server, enter Unknown.
d. When you finish manually adding the HBA, click OK to save the information and close the dialog
box. To close the dialog box without saving any data, click Cancel.
NOTE: A map on the left side of the dialog box presents a graphical representation of access
assignments. HBAs that currently have access to the LUN (access is granted, as in step 3) are
designated with a solid blue line drawn between the HBA and the LUN. If this access is removed
(access is denied, as in step 4), the line is dotted red. If the HBAs currently have no access to the
LUN and access is granted, the line is dotted blue.
6. Click Set Logical Disk Presentation.
7. Click Close.
NOTE: If you present (assign) a logical disk to a Windows system, you can instead use the system’s Disk
Management option to create partitions and assign a drive letter or mount path on partitions.
1. To access Computer Management, choose one of the following options:
Open the Windows Control Panel, select Administrative Tools, and then select Computer
Management.
On the Windows desktop, right-click the My Computer icon, and then click Manage.
2. In the Computer Management utility’s left pane under Storage, click Disk Management.
Page view 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 149 150

Comments to this Manuals

No comments