Following information is displayed in the USB table:
• Port—displays the USB port numbers.
• Device Description—displays the device name when the USB device is attached to the port.
• Status—displays the status of the USB device whether it is Present or Absent or N/A. Default
value is displayed as N/A against each available ports on this machine.
Memory Modules
This section lists detailed information about the memory boards and modules installed in the system.
The following items may be displayed:
• Socket Number—displays the socket number for the memory module.
• Type—displays the following values depending on the type of memory module selected.
Not installed◦
◦ Board—The memory module is permanently mounted (not modular) on a system board
or memory expansion board.
◦ Single width module
◦ Double width module
◦ SIMM (Single Inline Memory Module)
◦ PCMCIA (Personal Computer Memory Card International Association technology memory
module)
◦ Compaq/HP specific memory module
◦ DIMM (Dual Inline Memory Module)
• Size—Displays the size of the memory module.
• Speed—Displays the speed of the memory module.
• Technology—Displays the possible values for the memory module technology, including:
FPM (Fast-Page Mode)◦
◦ EDO (Extended Data Out)
◦ BEDO (Burst Extended Data Out)
◦ Synch DRAM (Synchronous DRAM)
◦ Unknown
System Resources
• This section lists the resources in use by the device or client workstation in the following order:
• IRQ Numbers—The Interrupt Request number displays, followed by the slot number of the
board that is using this interrupt.
• Port Address—The port address range displays, followed by the slot number of the board that
is using this I/O port range.
• DMA Channels—The DMA channel displays, followed by the slot number of the board that
is using this channel.
• Memory—The memory range displays, followed by the slot number of the board that is using
this memory.
Sub-system Classification 137
Comments to this Manuals