Agent information 59
• Degraded—Indicates that the library has degraded in some manner.
• Failed—Indicates that the library has failed and can no longer return data. The library might need to be
replaced.
• Offline—Indicates that the Storage Agents can no longer communicate with the library. This could be
caused by a cabling problem or the library might be powered off.
• Unknown—The status of the tape library cannot be determined. Ensure the latest drivers and Storage Agents
are installed.
• Model—Displays the tape library model.
• Serial Number—Displays the unit serial number for the library. It can be used for identification purposes.
• Firmware Version—Displays the firmware revision level of the tape library as returned by the SCSI inquiry
command.
• Service Hours—Displays the number of hours in service.
• Total Moves—Displays the total number of moves.
• Door Status—Displays the tape library door status. The following values are valid:
• Open—Indicates that the tape library door is open.
• Closed—Indicates that the tape library is closed.
• Not supported—Indicates that the tape library does not detect or report door status.
• Unknown—The door status of the tape library cannot be determined. Ensure the latest drivers and Storage
Agents are installed.
• Temperature—Displays the tape library temperature status. The following values are valid:
• OK—Indicates that the temperature of the library is within normal operating limits.
• Safe Temperature Exceeded—Indicates that the temperature of the library has exceeded the safe operational
temperature. The library continues to operate under this warning.
• Maximum Temperature Exceeded—Indicates that the temperature of the library has exceeded the normal
operating limits to the extent that the library might no longer function.
• Not supported—Indicates that the library cannot detect or report the temperature status.
• Unknown—The temperature status of the tape library cannot be determined. Ensure the latest drivers and
Storage Agents are installed.
• Redundancy—Displays the tape library redundancy status, which denotes the presence of internal redundant
components, such as fans, power supplies, etc. The following values are valid:
• Active—Indicates that the library is capable of detecting and reporting redundant components, there are
enough redundant units already installed, and the redundancy is active.
• Capable—Indicates that the library is capable of detecting and reporting redundant components but there
are not enough redundant units installed to make redundancy active.
• Not capable—Indicates that the library is capable of detecting and reporting redundant components but
there are no components that support redundancy.
• Not supported—Indicates that the library cannot detect or report redundancy status.
• Unknown—The redundancy status of the tape library cannot be determined. Ensure the latest drivers and
Storage Agents are installed.
• Hot Swap—Displays the tape library hot swap status which denotes the presence of hot swappable internal
components, such as drives, fans, power supplies, etc. The following values are valid:
• Capable—Indicates that the library is capable of detecting and reporting hot-swappable internal
components and has at least one hot-swappable component.
• Not capable—Indicates that the library is capable of detecting and reporting hot swappable internal
components but there are no hot-swappable components installed.
• Not supported—Indicates that the library cannot detect or report hot-swap status.
• Unknown—The hot-swap status of the tape library cannot be determined. Ensure the latest drivers and
Storage Agents are installed.
• Last Known Error—Displays the hexadecimal error status code including text information, if available. For
details, see the hardware documentation for more information.
• Associated Tape Drives—Displays a list of tape drives associated with the tape storage system.
Tape devices
Select a tape device entry in the SCSI controller submenu to display a list of information and status associated with
the selected tape device. The following information is displayed:
• Status—Displays the status of the SCSI Tape drive that you selected. The following values are valid:
Comments to this Manuals