HP 4000M User Manual download pdf (Page 26)

2-4

Configuring an IP Address on the Switch

Manually Configuring an IP Address

Configuring an IP Address

on the Switch

Where To Go From Here

The above procedure configures your switch with an IP address and subnet

mask. With the proper network connections, you can now manage the switch

from a network management station or from a PC equipped with a web

browser.

■ To access the switch using a web browser, refer to chapter 3, “Using the

HP Web Browser Interface”.

■ To continue to use the console interface, refer to chapter 4, “Using the

Switch Console Interface”.

■ To access the switch using a network management tool, refer to chapter

5, “Using HP TopTools or Other SNMP Tools to Monitor and Manage the

Switch”.

■ Inbound telnet access to the switch is enabled in the factory default.

• To change the current telnet access parameter, turn to “Configuring

the Console/Serial Link from the Switch Console” on page 6-20.

• To use telnet to access the switch console, refer to “Starting and

Ending a Console Session” on page 4-2.

You can also start a telnet session to the switch console from the web

browser interface. Click on the Configuration tab in the web browser

interface, then click on telnet session to the switch console. If you need

information on how to access the switch via the web browser inter-

face, refer to chapter 3, “Using the HP Web Browser Interface”.

■ For problems or error indications, refer to chapter 8, “Troubleshooting”.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 303 304

No comments

HP 4000M User Manual Page 26