HP 1TB User Manual download pdf (Page 29)

7. Access the HP All-in-One Storage System using the LO100 Remote Console functionality. Log on

to the HP All-in-One Storage System with the default user name administrator and the

password hpinvent. The HP All-in-One Storage System Management Console starts automatically.

NOTE:

When the Remote Console feature is enabled, you can get access to the storage system's

The Lights-Out 100 port comes with factory default settings, which the administrator can change. See

the HP ProLiant Lights-Out 100 Remote Management User Guide for information about changing these

settings. To obtain this guide, go to http://www.hp.com/support/manuals, navigate to the servers

section, and select Server management. In the ProLiant Essentials Software section, select HP Lights-Out

100i (LO100i) Software.

Using the Integrated Lights-Out 2 method

Integrated Lights-Out 2 (iLO 2) is HP's fourth generation of Lights-Out management technology that

allows you to perform virtually any system administrator or maintenance task remotely as if you were

using its keyboard, mouse and monitor, power button and floppy, CD or USB key, whether or not the

server is operating. It is available on the AiO600 in two forms, iLO 2 Standard and iLO 2 Advanced.

iLO 2 Standard provides basic system board management functions, diagnostics and essential

Lights-Out functionality on supported storage systems. iLO 2 Advanced provides advanced remote

administration functionality as a licensed option, which is included with the HP All-in-One Storage

System.

The Integrated Lights-Out port on the storage system can be configured through the Rapid Startup

Wizard or through the iLO 2 ROM-Based Setup Utility (RBSU). SNMP is enabled and the Insight

Management Agents are preinstalled.

The HP iLO 2 management processor provides multiple ways to configure, update, operate, and

manage servers remotely. The HP StorageWorks 600 All-in-One Storage System is preconfigured

with iLO 2 default factory settings, including a default user account and password. These settings can

be found on the iLO 2 Default Network Settings tag on the front of the server. If iLO 2 is connected

to a network running DNS and DHCP, you can use it immediately without changing any settings.

For more information on using HP iLO 2, see the HP Integrated Lights-Out 2 User Guide.

To quickly set up iLO 2 using the default settings for iLO 2 Standard and iLO 2 Advanced features on

AiO600 Storage System, follow these steps:

1. Ensure that a network cable is connected to the iLO 2 port located on the back of the storage

system.

NOTE:

This connection method is easiest when the connection is to a DHCP and DNS supported

network.

2. If not using dynamic DHCP (IP addressing), you will need to input a static IP address by using

the direct attach method and the iLO 2 RBSU.

All-in-One Storage System 29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 203 204

No comments

HP 1TB User Manual Page 29