HP 10TB User's Guide Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 181
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
1. If your storage system is delivered in a rack, proceed to Step 2. If you ordered the storage
system without the rack, install the rail kit and enclosure in the rack using the installation
instructions that are included with the rail kit.
IMPORTANT: Ensure that cabling in the back of the rack system does not interfere with
system operation or maintenance. Bind cables loosely with cable ties and route the excess
out of the way, along the side of the rack, to keep system components and indicators visible
and accessible.
Figure 3 Storage system installed in a rack
1
2
3
4
5
6
7
1. Storage system enclosure
2-5. Disk enclosures (optional)
6-7. Cable connection, with no bend radius smaller than 5 cm
2. If you purchased disk enclosures, rack and cable the disk enclosures before moving to the
next step.
3. Cable the storage system to your network and attach the power cords. See “Rear view”
(page 7) for connecting the power cables.
Cable disk enclosures
When cabling disk enclosures to the HP StoreEasy 5000 Storage, the connections are made
between the I/O module ports. Figure 4 (page 10) shows the I/O module ports on the HP StoreEasy
5000 Storage. Figure 5 (page 10) shows the I/O module ports on the D2600 Disk Enclosure and
Figure 6 (page 10) shows the I/O module ports on the D2700 Disk Enclosure.
Cable disk enclosures 9
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 180 181

Comments to this Manuals

No comments