HP Pro 3348 Specifications download pdf (Page 167)

Blurry video or requested resolution cannot be set.

Cause Solution

If the graphics controller was upgraded, the correct graphics

drivers may not be loaded.

Install the video drivers included in the upgrade kit.

Monitor is not capable of displaying requested resolution. Change requested resolution.

Graphics card is bad. Replace the graphics card.

The picture is broken up, rolls, jitters, or flashes.

Cause Solution

The monitor connections may be incomplete or the monitor

may be incorrectly adjusted.

1. Be sure the monitor cable is securely connected to the

computer.

2. In a two-monitor system or if another monitor is in close

proximity, be sure the monitors are not interfering with

each other’s electromagnetic field by moving them

apart.

3. Fluorescent lights or fans may be too close to the

monitor.

Monitor needs to be degaussed. Degauss the monitor. Refer to the documentation that came

with the monitor for instructions.

Image is not centered.

Cause Solution

Position may need adjustment. Press the monitor's Menu button to access the OSD menu.

Select ImageControl/ Horizontal Position or Vertical

Position to adjust the horizontal or vertical position of the

image.

“No Connection, Check Signal Cable” displays on screen.

Cause Solution

Monitor video cable is disconnected. Connect the video cable between the monitor and computer.

CAUTION: Ensure that the computer power is off while

connecting the video cable.

Solving Display Problems 157

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 225 226

No comments

HP Pro 3348 Specifications Page 167