Hp Deskjet 990cxi Printer User Manual download pdf (Page 19)

Printing Basics: Infrared (Ir) Printing

Using Infrared with a PowerBook

If your PowerBook is equipped with infrared technology that uses

the IrDA protocol, you can establish wireless TCP/IP or AppleTalk

connection.

For instructions, refer to one of the following:

• Reference guide or instructions that came with the PowerBook

• Manufacturer’s web site or support telephone number

• Infrared Data Association (IrDA) web site at: http://www.irda.org

Printing from a PowerBook

1 Make sure the printer is turned on.

2 Locate the infrared lens on the PowerBook.

3 Align the PowerBook’s infrared lens with the printer’s infrared

lens. Position the PowerBook up to 3 feet (1 meter) from the

printer and within a 30–degree total angle from the printer’s

infrared lens.

• The path between the two infrared devices must be clear of

obstacles.

• When the two infrared devices are lined up correctly, the

infrared light on the printer will begin to blink. This indicates

that a connection has been established between the two

devices.

4 Select your printer using the Chooser. See “Choosing Your

Printer” on page 5 for instructions.

Note:

If the PowerBook is moved out of range of the printer’s

infrared lens at any time during the printing process, the infrared

light may turn off and the printer may stop printing. If you realign

the devices within approximately 3–30 seconds, the print job will

resume.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 84 85

No comments

Hp Deskjet 990cxi Printer User Manual Page 19