Hp Deskjet 460cb Mobile Printer User Manual download pdf (Page 10)

Connecting to the printer8

Configuring and using 802.11 wireless profiles

Each profile you configure in the software (1, 2, and 3) corresponds to a wireless profile switch position

(1, 2, and 3) on the printer. The current profile is the current position (1, 2, or 3) of the wireless profile

switch.

With the wireless profile switch on the printer, you can store settings for up to three 802.11 computers or

networks. This allows you to easily move the printer from home to office or between any three wireless

network environments.

When you install the printer driver from the Starter CD and select Wireless for the connection type, the

802.11 wireless profile settings are stored in the current position of the wireless profile switch. Once you

have installed the software using a wireless connection, you can configure the three wireless profile

settings to match the wireless networks you want to use.

To configure 802.11 wireless profiles

1. Open the Toolbox. (See Opening the Toolbox.)

2. On the Services (Palm OS) or Printer Services (Pocket PC) tab, tap Wireless Settings.

3. Tap the profile that you want to configure.

4. Configure the desired settings, such as the wireless network name (SSID), the communication mode,

the channel, the type of authentication used, and the type of encryption used. For more information

about 802.11 wireless settings, see the onscreen user’s guide for the printer.

5. Tap OK to save the settings.

NOTE: When new 802.11 settings are sent to the printer to configure one of the wireless profiles, the

printer will turn off and then back on again (power cycle) to enable the settings.

To print on a specific profile

1. Move the wireless profile switch on the printer to the profile that matches the wireless network you want

to use.

2. Print a document using the installed printer driver.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

No comments

Hp Deskjet 460cb Mobile Printer User Manual Page 10