Scan using Webscan
Webscan is a feature of the embedded web server that lets you scan photos and documents from your printer
to your computer using a web browser.
This feature is available even if you did not install the printer software on your computer.
NOTE: By default, Webscan is o. You can enable this feature from the EWS.
If you are unable to open Webscan in the EWS, your network administrator might have turned it o. For more
information, contact your network administrator or the person who set up your network.
To enable Webscan
1. Open the embedded web server. For more information, see Open the embedded web server
on page 78.
2. Click the Settings tab.
3. In the Security section, click Administrator Settings.
4. Select Webscan to enable Webscan.
5. Click Apply.
To scan using Webscan
Scanning using Webscan oers basic scan options. For additional scan options or functionality, scan from the
HP printer software.
1. Load the original print side down near the icon at the corner of the scanner glass.
For more information, see Load an original on the scanner glass on page 23.
2. Open the embedded web server. For more information, see Open the embedded web server
on page 78.
3. Click the Scan tab.
4. Click Webscan in the left pane, change any settings, and then click Start Scan .
56 Chapter 5 Copy and scan ENWW
Comments to this Manuals