HP DesignJet 8000s User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 230
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
Handling precautions
These precautions are recommended to avoid damage to your printer and its components.
Power supply
Use the power supply voltage specified on the nameplate.
Check the printer electrical outlet for proper polarity and grounding before connecting printer. Failure
to do so may result in fire and electric shock hazards.
Be sure the printer is well-grounded. Failure to ground the printer may result in electrical shock, fire,
and susceptibility to electromagnetic interference.
Avoid overloading the printer’s electrical outlet with multiple devices.
Use only the electrical cable supplied by HP with the printer.
Printer
Wipe the printer clean with a soft cloth. A cloth moistened with a neutral detergent may be used. Do
not allow liquid to enter the printer. This may create risk of fire and electrical shock and cause a
malfunction. Do not clean the printer with benzene or paint thinner. This may damage the paint.
Never touch the printhead nozzles. They can be easily damaged or clogged.
Regular inspection and maintenance
Make sure you observe the appropriate maintenance guideline. See
How do I maintain the printer.
Clean the capping unit every day.
Never switch off the printer without following the correct procedures. Even with the storage liquid
installed, never leave the printer off for more than 4 weeks. Leaving your printer off for more than 4
weeks can cause permanent damage that cannot be repaired. In all other cases make sure you
observe the appropriate maintenance guidelines.
Consumables
Ink inside the ink cartridge is combustible. Do not expose or store near open flames, sparks, or other
sources of ignition.
HP Ink Cartridges should be installed before the “Install By” date printed on the cartridge. Use of the
Ink Cartridge 3 months beyond the “Install By” date may cause deterioration in print quality or a printer
malfunction.
Do not disassemble the ink cartridges. Ink cartridges are intended for single use only.
Avoid contact between ink and skin, eyes, and clothing.
Immediately wash skin with soapy water.
Remove clothing soaked with ink from contact with skin.
Use an approved eye wash station if ink is splashed into eyes and consult a doctor if necessary.
If an approved eye wash station is unavailable, flush eyes with cold water and consult a doctor
if necessary.
ENWW Handling precautions 9
Introduction
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 229 230

Comments to this Manuals

No comments