5–6 Maintenance and Service Guide
Removal and Replacement Procedures
5.5 Upper Chassis
1. Prepare the Expansion Base for disassembly (Section 5.3).
2. Remove the base plate (Section 5.4).
3. Turn the Expansion Base right-side up with the rear panel
facing you.
4. Remove the adhesive-backed 8.0-mm diameter screw
covers 1.
5. Remove the two PM2.0×6.0 screws 2 that secure the rear
cover to the base enclosure.
Removing the rear cover screws
Comments to this Manuals