Compaq/HP Windows® CE to Wyse Windows® CE.Net v4.2 Conversion Kit Installation Guide Issue: 060404
2 Installing the Conversion This chapter will describe the procedures for installing the software conversion kit in the T1010 and T20 terminals
3 Chapter 2 Note: Failure to load the primer at this step will cause the conversion to fail. b) Copy the primer from the T1010/T1010 Primer directo
4 Chapter 2 For Units with 16MB or more of onboard flash follow these steps. To determine the onboard flash see the HP Product matrix at the end o
5 Chapter 2 c) Click on the Upgrade button. After the T1010 contacts the IIS/FTP server, a Firmware Upgrade Warning box will appear on the terminal
6 Chapter 2 Install the software in the T20 If you encounter any problem during this upgrade please contact Wyse technical support at 800-800-9973.
7 Chapter 2 firmware upgrade is in process. Click on the Start button. The upgrade process will begin. d) After the terminal Firmware upgrade is
8 Chapter 2 i) From the Compaq Connection Manager Screen double click on the Control Panel button. ii) Double click on the System icon the click o
Compaq/HP Windows® CE to Wyse Windows® CE.Net v4.2 Conversion Kit Installation Guide Issue: 060404 Wyse Technology I
Copyright Notice © 2004 Wyse Technology Inc. All rights reserved. This manual is copyrighted. You may not reproduce, transmit, transcribe, store i
License Agreement THIS LICENSE SETS FORTH THE TERMS UNDER WHICH WYSE TECHNOLOGY INC. AND/OR ITS LICENSORS (collectively referred to as “Licensor”) IS
No Warranties # ','%#)
0 ! %U
Contents Getting Started 1 Before You Begin 1 What’s In the Kit 1 Required Tools and Materials 3 Associated Document
1 Getting Started This document describes how to the convert software in all flash configurations of the Compaq/HP Model T1010 and T20 that are
2 Chapter 1 Required Tools and Materials You need the following items before you can install. • No special tolls are required for this upgrade
Comments to this Manuals