HP Deskpro AP550 User's Guide download pdf (Page 47)

Hardware Reference Guide B-1

Compaq Confidential - Need to Know Required

Writer: Lydia Sanchez Part Number: xxxxxx-001 File Name: appb.doc

Last Saved On: 04/12/00 3:48 PM Last Saved By: Lydia Sanchez

appendix B

OMPUTER

ETUP

Computer Setup Utilities (F10)

Use Computer Setup to do the following:

■ Change factory default settings.

■ Set the system date and time.

■ Set, view, change, or verify the system configuration, including

settings for processor, graphics, memory, audio, storage,

communications, and input devices.

■ Modify the boot order of bootable devices such as hard drives,

diskette drives, CD-ROM drives, DVD-ROM drives, or LS-120

drives.

■ Configure the boot priority of UATA and SCSI hard drives

controllers.

■ Configure Quiet Drive options (for drives that support this

feature).

■ Enable Quick Boot, which is faster than Full Boot but does not run

all of the diagnostic tests run during a Full Boot. You can set your

system to:

❏ always Quick Boot (default);

❏ periodically Full Boot (from every 1 to 30 days); or

❏ always Full Boot.

■ Enable or disable Network Server Mode, which allows the

computer to boot the operating system when the power-on

password is enabled, with or without a keyboard or mouse

attached. When attached to the system, the keyboard and mouse

remain locked until the power-on password is entered.

■ Select Post Messages Enabled or Disabled to change the display

status of Power-On Self-Test (POST) messages. Post Messages

Disabled suppresses most POST messages, such as memory count,

product name, and other non-error text messages. If a POST error

occurs, the error is displayed regardless of the mode selected. To

manually switch to Post Messages Enabled during POST, press

any key (except F10 or F12).

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 78 79

No comments

HP Deskpro AP550 User's Guide Page 47