HP Deskpro AP550 User's Guide download pdf (Page 33)

2-18 Hardware Upgrades

Compaq Confidential - Need to Know Required

Writer: Beth Zanca Part Number: 191010-001 File Name: e-ch02.doc

Last Saved On: 04/18/00 2:28 PM Last Saved By: Lydia Sanchez

Removing a Drive

✎

Compaq does not support mixing Ultra ATA and SCSI hard

drives in the same system. If you are replacing a hard drive in

bay 4 or bay 5, the replacement drive should be of the same

type as the drive being removed.

If you are replacing the Ultra ATA hard drive in your workstation with

a SCSI hard drive, you will need a SCSI device option kit and the SCSI

controller option kit. The controller option kit contains the SCSI

controller and cable that supports multiple SCSI devices.

1. Turn off the workstation and any external devices. Disconnect the

power cord from the grounded AC outlet.

On a power-managed system, the power cord must be

disconnected from the grounded AC outlet.

2. Remove the workstation access panel. Refer to  Removing the

Workstation Access Panel in this chapter.

3. Remove the front bezel. Refer to  Removing the Front Bezel in

this chapter.

4. Disconnect the drive power and signal cables and, if it is a

CD-ROM drive, disconnect the audio connector.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 78 79

No comments

HP Deskpro AP550 User's Guide Page 33