HP 9000 rp7410 Installation Guide download pdf (Page 42)

Chapter 3

Installing Accessories

Installing Add-On Products

This section provides information on installation of additional products that may have been ordered after

server installation.

Embedded Mass Storage

When hard disks are installed, the top two hard disk drives are controlled by cell 1 through its assigned

MP/SCSI Core I/O card. The bottom two hard disk drives are controlled by cell 0 through its assigned

MP/SCSI Core I/O card.

The DVD/CD/DAT removable media drive is controlled by cell 1 through its assigned MP/SCSI Core I/O card.

See Figure 3-1.

A list of replacement disk drives for the HP 9000 rp7420 server is in Appendix A of the Service Guide for the

HP 9000 rp7420 server. The list contains both removable media disk drives and hard disk drives.

Figure 3-1 Internal Disks

Drive 1-1

Path: 1/0/0/3/0.6.0

Drive 1-2

Drive 0-2

Path: 1/0/0/3/0.5.0

Path: 0/0/0/3/0.5.0

Drive 0-1

Path: 0/0/0/3/0.6.0

DVD/CD/DAT

Path: 1/0/0/3/1

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 75 76

No comments

HP 9000 rp7410 Installation Guide Page 42