HP 7800 Specifications Page 56

  • Download
  • Add to my manuals
  • Print
  • Page
    / 102
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 55
5-2 www.hp.com Technical Reference Guide
Input/Output Interfaces
5.2 SATA Interface
These systems provide one, three, or four serial ATA (SATA) interfaces that support tranfer rates
up to 3.0 Gb/s and RAID data protection functionality. The SATA interface duplicates most of
the functionality of the EIDE interface through a register interface that is equivalent to that of the
legacy IDE host adapter.
The ICH9 DO component includes Intel RAID migration technology that simplifies the
migration from a single hard to a RAID0 or RAID1 dual hard drive array without requiring OS
reinstallation. Intel Matrix RAID provides exceptional storage performance with increased data
protection for configurations using dual drive arrays. A software solution is included that
provides full management and status reporting of the RAID array, and the BIOS ROM also
supports RAID creation, naming, and deletion of RAID arrays.
The standard 7-pin SATA connector is shown in the figure below.
Figure 5-1. 7-Pin SATA Connector (P60-P63 on system board).
The USDT system includes a notebook-type SATA connector (J102) that mates directly (i.e.,
without a cable) to a 2.5-inch mass storage device.
Table 5-1.
7-Pin SATA Connector Pinout
Pin Description Pin Description
1Ground 6RX positive
2 TX positive 7 Ground
3TX negative AHolding clip
4 Ground B Holding clip
5RX negative ----
Pin 1
Pin 7
A
B
Page view 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 101 102

Comments to this Manuals

No comments