HP 3PAR User's Guide download pdf (Page 12)

Table 6 Environmental Specifications for HP 3PAR Storage systems (continued)

ValueSpecification

0–3,000 ft (914.4 m)

50 –95° F (10 –35° C)

3,000–10,000 ft (914–3,048 m)

Non-operating –40 –203° F (–40– 95° C)

0–40,000 ft (0–12,192 m)

18° F/hr (10° C/hr)

Temperature gradient

Operating

Non-operating

20 – 80 percent non-condensing, maximum gradient 10

percent per hour

Relative humidity

NOTE: Refer to “Structural/Environmental Considerations” (page 18) for complete details.

Cable Specifications

The following table lists the types of cables commonly required for storage system installation.

Table 7 Required Cables

Connector TypeCable Type

RJ-45Ethernet (Category 5) 3 cables minimum with 2 static IPs

LC-LCMulti-mode Fibre Channel

The following table shows the typical Fibre Channel cable lengths required for a given type of

connection:

Table 8 Fibre Channel Cable Usage Guidelines

Used for...Cable Length

Drive chassis to controller node connections in the same side of the same cabinet (for

example, an even-numbered drive cage to an even-numbered node).

2 m

Drive chassis to controller node connections across the same cabinet (for example, an

even-numbered drive cage to an odd-numbered node).

4 m

Cabling between cabinets. Always round up to the nearest size.10 m 50 m 100 m

The following table shows the maximum supported Fibre Channel cable length based on the cable

size and port speed.

Table 9 Cable Limitations for Fibre Channel Host Connectivity

Cable Length LimitSpeedCable Size

100 meters2 Gbps62.5 micron

70 meters4 Gbps62.5 micron

300 meters2 Gbps50 micron

150 meters4 Gbps50 micron

NOTE: Refer to “Network, Cabling and Connectivity” (page 37) for more details on cable

requirements and configurations.

12 System Components and Specifications

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 52 53

Comments to this Manuals

No comments

HP 3PAR User's Guide Page 12

Comments to this Manuals

Related products and manuals for Networking HP 3PAR