HP 3PAR User's Guide download pdf (Page 11)

Table 5 T-Class Storage System Power Requirements (continued)

160208BTUs/hour

4 x 450 GB FC Drive Magazines

5788Watts

194300BTUs/hour

4 x 600 GB FC Drive Magazines

6573Watts

222249BTUs/hour

4 x 1 TB NL Drive Magazines

3247Watts

109160BTUs/hour

4 x 2 TB NL SATA Drive Magazines

3242Watts

111143BTUs/hour

Service Processor

260SuperMicro Watts

1370 BTUs/hr.SuperMicro

BTUs/hour (fully

populated)

280SuperMicro II Watts

955 BTUs/hr.Supermicro II

BTUs/hour (fully

populated)

Theoretical maximum based on branch circuit capacity.

Under maximum load.

Up to 10 drive magazines (40 drives) per drive chassis.

NOTE: All calculations in Table 5 (page 10) are based on fully populated components; for

example, a fully populated drive chassis contains 40 disks. Specifications are not provided for

partially populated drive chassis because different drives and magazine types have varying current

requirements and can be installed in a variety of different combinations. Therefore, only the

maximum, fully loaded configuration is cited.

NOTE: The total system peak inrush current on system startup can vary depending on the system

configuration but is mitigated through a staggered (sequenced) drive spin-up and by distributing

the load equally unless there is a failure on a given line.

Environmental Specifications

The following table lists the environmental specifications for the T-Class Storage systems.

Table 6 Environmental Specifications for HP 3PAR Storage systems

ValueSpecification

0 –10,000 ft (3,048 m) 0 –40,000 ft (12,192 m)Altitude Operating Non-operating

50 –104° F (10–40° C)

Ambient temperature

Operating

Environmental Specifications 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 52 53

Comments to this Manuals

No comments

HP 3PAR User's Guide Page 11

Comments to this Manuals

Related products and manuals for Networking HP 3PAR