HP IO Accelerator for BladeSystem c-Class Solaris User Manual download pdf (Page 23)

Utilities 23

Option Description

-c

Attach only if clean.

-q

Quiet: disables the display of the progress bar and

percentage.

fio-beacon

Description

The fio-beacon utility enables all three LEDs on, to identify the specified IO Accelerator device.

IMPORTANT: This utility enables the LEDs on, unless you select the -0 option.

Syntax

fio-beacon <device> [options]

where <device> is the name of the device node (/dev/fctx), where x indicates the card number: 0, 1,

2, and so on. For example, /dev/fct0 indicates the first IO Accelerator device installed on the system.

Options Description

-0

Off: Turns off the three LEDs

-l

On (default): Enables the three LEDs on

-p

Prints the PCI bus ID of the device at <device> to standard output. Usage and error information

may be written to standard output rather than to standard error.

fio-bugreport

Description

Prepares a detailed report of the device for use in troubleshooting problems. The results are saved in the

/tmp directory in a file that indicates the date and time the utility was run.

Example

/tmp/fio-bugreport-20100121.173256-sdv9ko.tar.bz2

Syntax

fio-bugreport

NOTE: If the utility recommends that you contact Fusion-io support, disregard that message and

contact HP support (http://www.hp.com/support) instead.

Sample output

-bash-3.2# fio-bugreport /tmp/fio-bugreport-20090921.173256-sdv9ko ~

Collecting fio-status -a

Collecting fio-status

Collecting fio-pci-check

Collecting fio-pci-check -v

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 50 51

No comments

HP IO Accelerator for BladeSystem c-Class Solaris User Manual Page 23