HP Pavilion a434 Specifications download pdf (Page 8)

hp pavilion fx50 15” lcd monitor

Setting Up Your Monitor

6EnglishEnglish

English

4 Plug the video cable into the video connector at the rear of the

monitor.

Secure the cable by tightening the thumb screws on the video

connector.

5 Connect the audio cables to the connectors according to the

following color definitions:

Red + Green end ➔ PC

Red + Blue end ➔ rear of LCD monitor

6 Connect the power cord to the power source.

7 Turn on the computer and the monitor.

Connecting the Speakers

Your monitor comes with built-in speakers. If you bought your monitor

with a Hewlett-Packard™ Pavilion home PC, you will have two sets of

speakers: an external set shipped with the PC, and the built-in

monitor speakers.

The PC's external speakers connect to a Speaker Out port identified

on your PC's setting up poster, and will provide the best sound with

most Pavilion PCs.

If you want to use the monitor's built-in speakers, you must connect

them to the Line Out port on the back of your PC. Use the two audio

cables provided for connecting the speakers and the microphone to

the PC; refer to Step 5 of “Connecting the Cables” on page 6.

If your computer does not have a Line Out port, you can purchase a

sound card with a Line Out port to use the internal monitor speakers.

If you are not sure which port you have and your sound quality is

poor, try connecting your external speakers to the Speaker Out port.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 30 31

No comments

HP Pavilion a434 Specifications Page 8