HP F2105 User Manual download pdf (Page 29)

Setting Up the Monitor

User’s Guide 3–9

Connecting the Monitor to the PC

To connect the monitor video input to the PC:

1. Place the monitor upright, as shown in the following

illustration.

2. Connect the VGA or DVI-D (select models only) video cable

from the monitor to the VGA or DVI video connector on the

back panel of the PC.

✎

You can connect the VGA cable, the DVI-D cable, or both. Only

one cable is connected for typical installations. The DVI-D

connector (select models only) on the monitor is for digital-to-digital

connection only. If you connect both analog and DVI-D cables, the

PC connects through the analog cable by default. To change to

your DVI-D cable, you must change it in your monitor settings. Your

PC must have a DVI-compatible graphics card installed for use with

this DVI-D video cable. Your DVI-compatible graphics card may not

support the optimal monitor resolution. Refer to the documentation

that came with your graphics card.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 73 74

No comments

HP F2105 User Manual Page 29