HP F2105 User Manual download pdf (Page 21)

User’s Guide 3–1

Setting Up the Monitor

Before You Begin

1. Unpack the monitor. Make sure all contents are included. Store

the box and packing foam.

2. Ensure that the power is turned off to the monitor, PC system,

and other attached devices (monitor ships in off position).

3. Determine the video cable or cables that you want to connect

from the PC video card outputs to the VGA and DVI-D (select

models only) connectors on the monitor. You can connect one

or both cables.

❏ VGA cable: Standard VGA 15-pin cable.

❏ DVI-D cable (select models only): For digital operation, use

the DVI-D-to-DVI-D video cable provided. The DVI-D cable

supplied with this monitor is for digital-to-digital

connection only. Your PC must have a DVI-compatible

graphics card installed for use with this cable. Your

DVI-compatible graphics card may not support the optimal

monitor resolution. Refer to the documentation that came

with your graphics card.

4. Determine if the monitor is to be desktop-mounted or

wall-mounted. See “Installing the Monitor” in this chapter.

5. Prepare a flat area to use when assembling the monitor. You

may need a flat, soft, protected area for placing the monitor

screen-down while preparing it for wall mounting.

6. You need a Phillips head screwdriver for preparing the monitor

for wall mounting. You may need a straight-slot screwdriver to

secure some cables.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 73 74

No comments

HP F2105 User Manual Page 21