HP LaserJet 5 User Manual download pdf (Page 44)

Job Menu

You can change Job Menu items through your software application if

you have installed an appropriate printer driver. See Figure 3-2, item D

for the location of the Job Menu on the Menu Map.

Item Options Explanation

RESOLUTION 300

600*

At 600-dpi (dots per inch), the printer might need as much as four times

more memory to format a page than it needs at 300-dpi. For most

purposes, 600-dpi is recommended. It is recommended that you use

300-dpi for some bitmapped fonts and graphics designed to be printed at

300-dpi or for compatibility with the HP LaserJet 3 family of printers.

PERSONALTY AUTO*

PCL

POSTSCRIPT

(optional)

The printer can be switched from its standard personality (language), PCL,

to other personalities, such as PostScript. When PERSONALTY is set to

AUTO, the printer analyzes each print job it receives and switches

personalities automatically.

PAGEPROTCT AUTO*

This menu item will not be available unless a 21 PAGE TOO COMPLEX,

PRESS GO KEY error occurs (see “Understanding Printer Messages” in

Chapter 7). Memory Enhancement technology (MEt) attempts to

guarantee that all pages will print. If the page does not print, turn

PAGEPROTCT to ON. This may increase chances of a 20 INSUFFICIENT

MEMORY, PRESS GO KEY message. If this occurs, you need to add memory.

I/O TIMEOUT 15*

(5 to 300)

I/O timeout refers to the time, measured in seconds, that the printer waits

before ending a print job. This setting allows you to adjust timeout for best

performance. If data from other ports appear in the middle of your print

job, increase the timeout value. Press [- Value +] once to change setting

by increments of 1 or hold down to scroll by increments of 10.

*Indicates factory default.

Table 3-5 Job Menu Items

3-10 Using the Printer Control Panel EN

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 211 212

No comments

HP LaserJet 5 User Manual Page 44