Hp 110 User Manual download pdf (Page 57)

4. Remove the battery (see Battery on page 44).

5. Remove the service door (see

Service door on page 45).

Remove the memory module:

1. Pull away the retention clip (1) on each side of the memory module to release the module. (The

memory module (2) tilts up.)

CAUTION: To prevent damage to the memory module, hold it by the edges only. Do not touch

the components on the memory module.

2. Remove the memory module (3) by pulling the module away from the slot at an angle.

NOTE: Memory modules are designed with a notch (4) to prevent incorrect insertion.

Reverse this procedure to install the memory module.

RTC battery

Description Spare part number

RTC battery 599516-001

Before removing the RTC battery, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

Component replacement procedures 49

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 103 104

No comments

Hp 110 User Manual Page 57