HP 3C339 User Manual download pdf (Page 3)

1 Connecting to a Netware 3.12 Server

Windows for Workgroups

1 Connecting to a Netware 3.12 Server

Windows for

Workgroups

Requirements

• HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 in-

stalled.

• 3COM 3C339TokenRing card and drivers disk

DOS ODI - File Name: tlvmp339.dos

DOS and MS-Windows for Workgroups 3.11 media.

• Novell Netware server 3.12 that supports Net BEUI, NWLink IPX/SPX,

and NWLink NetBIOS transfer protocols.

• Netware client for DOS and MS-Windows.

Device Configuration

• I/O Base Address DC00

• Interrupt Request Level 10

• Boot PROM Disabled

• Transceiver Type Auto Select

• Network Driver Optimization Windows or OS/2 Client

• Maximum Modem Speed 9600 Bps

• Full Duplex Disabled

Procedure

1 With the HP Vectra VE7/VE8 set to PNP enabled, turn the machine off

install the 3COM 3C339 adapter card into an PCI slot.

2 Power on the machine and allow it to boot to a DOS prompt.

3 Insert the 3COM drivers diskette and execute 3C339CFG.EXE.

4 Select “CONFIGURE NIC,” and verify the resource settings listed above

under the heading “Device Configuration.”

5 If changes are required, save those changes and exit.

6 Remove the 3COM cards driver diskette and insert Netware client for DOS

and MS-Windows disk 1.

1 2 3 4 5 6 7 8 ... 29 30

No comments

HP 3C339 User Manual Page 3