HP JETDIRECT 400N User Manual download pdf (Page 29)

Installing the HP JetDirect Print Server Card 2-15

Installation

To install the card into the HP LaserJet 4V and

4MV printers

1. Turn off the printer and unplug the power cord.

2. Locate the HP modular I/O (MIO) slot at the back of the printer

(see the figure below).

3. If the slot has a cover plate, remove it.

4. Insert the card. Align the card with the guide rails in the printer.

5. Press the card into the slot until the card is firmly seated.

6. Tighten each thumbscrew a little at a time, alternating between

each side until both screws are secure.

7. Connect the network cable to the card.

8. Connect the power cord and turn on the printer.

NOTE

For the HP J4100A JetDirect card (RJ-45 and

BNC), you can connect to

one

of the Ethernet ports

(only one Ethernet port is active at a time).

For the HP J4105A JetDirect card (RJ-45 and DB9),

you can connect to

only one

Token Ring port.

Components face downward for 4V and

4MV printers

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 95 96

No comments

HP JETDIRECT 400N User Manual Page 29