Hp DL120 User Manual download pdf (Page 75)

Diagnostic tools 75

The Setup Utility loads the configuration values in a battery-backed nonvolatile memory called CMOS

RAM. This memory area is not part of the system RAM, which allows configuration data to be

retained when power is turned off. The values take effect when the system is booted. POST uses these

values to configure the hardware. If the values and the actual hardware do not agree, POST

generates an error message. You must run this utility to change the BIOS settings from the default or

current configuration.

The Setup Utility has five primary menu selections, including:

• Main

• Advanced

• Security

• Boot

• Exit

To run the Setup Utility:

1. Turn on the monitor and the server.

If the server is already turned on, save your data and exit all open applications, and then restart

the server.

2. During POST, press F10.

If you fail to press

F10 before POST is completed, you will need to restart the server.

The first page to be displayed will be the

Main menu showing the Setup Utility’s menu bar. Use

the left (Å) and right (Æ) arrow keys to move between selections on the menu bar.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 107 108

No comments

Hp DL120 User Manual Page 75