HP XP10000 User Manual download pdf (Page 29)

Installation 31

Verifying HBA installation

After configuring the ports on the disk array, verify that the HBAs are

installed properly.

Use the ioscan –f command, and verify that the rows shown in the example

are displayed. If these rows are not displayed, check the host adapter

installation (hardware and driver installation) or the host configuration.

Example

# ioscan -f

Class I H/W Path Driver S/W StateH/W Type Description

===============================================================================================

...

fc 0 8/12 fcT1 CLAIMED INTERFACE HP Fibre Channel Mass Storage Adapter

lan 1 8/12.5 fcT1_cntl CLAIMED INTERFACE HP Fibre Channel Mass Storage Cntl

fcp 0 8/12.8 fcp CLAIMED INTERFACE FCP Protocol Adapter

ext_bus 2 8/12.8.0.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface

...

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 81 82

No comments

HP XP10000 User Manual Page 29