HP XP10000 User Manual download pdf (Page 74)

76 HP StorageWorks Disk Array XP Operating System Configuration Guide: HP-UX

Setting the maximum number of volume groups

using SAM

The HP-UX kernel specifies the maximum number of volume groups that

can be created. The default is 10. You may need to change this number to

accommodate new devices on the disk array. To change this number, use

the Kernel Configuration function.

To change the maximum number of volume groups:

1. Select the Kernel Configuration function, then select Configurable

Parameters.

2. In the Configurable Parameters window, select the maxvgs

parameter, select the Actions menu, and then select Modify

Configurable Parameter.

3. In the Modify Configurable Parameter window, enter the desired

maximum number of volume groups in the Formula/Value field, and

then click OK.

4. In the Configurable Parameters window, make sure that none of the

parameters are selected. Then select the Actions menu, and select

Create New Kernel.

5. When the configuration window opens, click Yes to create the new

kernel (or click No to return to the Configurable Parameters window.)

6. When the Reboot the System window opens, click OK to move the

new kernel into place and reboot the system.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 80 81 82

No comments

HP XP10000 User Manual Page 74