HP 40C User Manual download pdf (Page 6)

Overview 6

Overview

Before you begin

For more information on site requirements, specifications, power requirements, management requirements,

and supported facility connections, see the HP Performance Optimized Datacenter 40c G2 Site Preparation

and Requirements Guide.

The actual location of various components or included subsystems in your HP POD 40c G2 might vary from

what is described in this document. For information specific to your HP POD 40c G2, see the drawings

included in the Operations and Maintenance Manual for the HP Performance Optimized Datacenter 40c

G2.

Operator safety

The HP POD 40c G2 provides service access areas for periodic maintenance and service and is only to be

used by owner-authorized personnel specifically trained in the maintenance and service of the HP POD 40c

G2.

The HP POD 40c G2 is not a habitable structure suitable for long term personnel occupancy.

WARNING: To avoid the risk of personal injury or loss of life, all personnel must comply with PPE

requirements when

opening or working inside areas of the HP POD 40c G2 that are marked as

hazardous voltage, per NFPA 70E in accordance with NEC (NA) and IEC (EMEA and APJ).

WARNING: To avoid the risk of personal injury, hearing protection must be worn at all times

when working inside the HP POD 40c G2.

WARNING: To avoid the risk of personal injury or damage to the equipment, do not insert

anything inside the electrical busways except the approved HP busway drop boxes.

The customer is responsible for completing any Environmental Health and Safety (EHS) evaluation of the HP

POD 40c G2 or any attached structural component purchased through HP. The customer must complete an

arc flash assessment of the HP POD 40c G2 and the associated electrical supply system for operation,

maintenance, and so on.

Component safety

CAUTION:

If the HP POD 40c G2 is shut down for an extended period of time, such as during

routine maintenance, use desiccant units or materials to eliminate condensation within the HP

POD 40c G2. Condensation causes damage to IT equipment and HP POD 40c G2 controls.

CAUTION: Electrostatic discharge might damage electronic components. Be sure that you are

properly grounded (earthed) by wearing approved grounding straps before beginning any

installation procedure or repair.

1 2 3 4 5 6 7 8 9 10 11 ... 83 84

No comments

HP 40C User Manual Page 6