HP 002-01A Quick Start Guide Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 164
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
Connecting Speakers or Microphone 27
6 Turn on the receiver/amplifier.
7 Select the receiver/amplifier input to which the Y adapter cables are connected.
8 Turn on the computer.
9 After the audio system is connected to the computer, configure the audio software for
sound output for your computer model. See “Configuring Speaker and Sound
Options.”
Connecting digital audio
(Select models only)
If you have a audio card and you are connecting your home stereo AV receiver via digital
out, connect the 3.5 mm (1/8-inch) stereo plug to the Digital Audio Out connector on the
audio card. Connect the red RCA stereo plug on the 3.5 mm (1/8-inch) Y adapter cable to
the AV receiver’s digital input connector on the AV receiver. If the red RCA stereo plug
does not work, try the white stereo plug. Only one of the connectors is needed.
To connect digital audio, your computer must include a Digital Audio Out connector on
either the audio card or the back panel. You must connect multichannel speaker outputs if
you connect the digital output.
To connect digital audio speakers:
1 Turn off the computer.
2 Connect the orange Digital Audio Out connector on the back panel of
your computer to the digital input (S/PDIF) on the digital speakers or a
digital audio system.
3 Turn on the computer.
4 Connect the speaker system to the power.
5 Turn on the speaker system.
6 After the speakers are connected to the computer, configure the audio software for
sound output for your computer model. See “Configuring Speaker and Sound
Options.”
Audio card with digital output and type 3 connectors: See “Configuring speakers
with Realtek HD Audio Manager.” Follow the instructions to enable digital audio
output.
Audio card with digital output and type 6 connectors: See “Configuring speakers
with Realtek HD Audio Manager.” By default, digital audio output is already
enabled.
Audio card: Follow the instructions to enable digital audio output.
NOTE: Always turn on the computer before the speaker system.
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 163 164

Comments to this Manuals

No comments